MPESB Group 3 Sub Engineer Recruitment Notification 2026 Out: 1,715 Vacancies, Reopened Applications & Exam Date

MPESB Sub Engineer Recruitment 2026: Overview

MPESB Group 3 Vacancy 2026: What Has Changed?

The supplied recruitment update records an increase from 1,700 to 1,715 posts, adding 15 vacancies to the earlier total. The additional posts are reported under Sub Engineer (Civil) for the Tribal Affairs Department. The revised category distribution is shown below.

Category totals provide a broad view of the revised recruitment, but applicants should also review the post code, department, reservation rules and qualifications listed in the official rulebook before choosing a post.

Post-Wise Vacancy Distribution

The recruitment covers a range of technical and support roles. According to the supplied vacancy summary, Sub Engineer posts across engineering disciplines account for the largest share of openings.

Note: The post-wise figures above reproduce the distribution in the supplied reference. Always cross-check the official post-code-wise rulebook for the final vacancy position.

MPESB Sub Engineer Exam Date 2026–27

The supplied update says the examination has been postponed from its earlier date of 7 October 2026. The revised date is 20 January 2027, with the test to be conducted online at designated examination centres. Admit-card details and centre instructions should be checked on the official website when released.

Application Reopening: Dates and Important Instructions

As stated in the supplied recruitment material, the online application window is scheduled to reopen from 13 October through 27 October 2026, with corrections permitted until 28 October 2026. Applicants who submitted their forms earlier are reported not to need to apply again.

Before starting a new application, read the current notice and confirm whether your existing application is complete. Keep your educational details, identity information, photograph, signature and any other required documents ready, and carefully review all entries before final submission.

Important Updates from the Revised MPESB Rulebook

The additional document supplied for this article is a revised MPESB rulebook extract for the Group-03 Combined Recruitment Examination 2026 (II). It confirms the updated application schedule, examination shifts, fee details and several department-specific Sub Engineer vacancy tables. These details should be read alongside the overall recruitment summary, as individual post codes can have separate conditions.

Revised dates and examination schedule

Application fee and portal charges

The fee concessions in the rulebook are subject to the stated domicile and category conditions. Confirm the final amount displayed in the official application portal before payment.

Exam city selection

The revised document asks candidates to select four preferred examination cities in priority order. The listed possible cities are Bhopal, Indore, Jabalpur, Khandwa, Neemuch, Ratlam, Rewa, Sagar, Satna, Sidhi and Ujjain. Allocation depends on seat availability, and the Board may assign a different city or centre.

Identity and entry requirements

• Aadhaar registration is stated to be mandatory.
• Bring an original photo identity document accepted by the Board, such as voter ID, PAN, Aadhaar, driving licence or passport.
• The document specifies Aadhaar-related information and biometric verification during entry and the examination; candidates should follow the current rulebook instructions and ensure their Aadhaar is unlocked for verification.
• Reach the centre within the reporting window. Late entry after the permitted reporting time may not be allowed.
• Electronic devices, calculators, digital watches and unauthorised notes are prohibited in the examination room.

Department-specific Sub Engineer vacancies in the amendment

The attached revised pages include detailed vacancy tables for selected post codes, rather than replacing the overall Group-3 vacancy summary. Examples visible in the amendment are listed below; applicants should consult the relevant post-code table for reservation, disability-category and recruitment-type details.

These are selected post-code entries from the attached amendment, not a complete post-wise list of all 1,715 vacancies. For post code 124, the document specifies a three-year Diploma in Civil Engineering from a technical institution/board recognised by the Madhya Pradesh Government and shows a pay scale of ₹32,800–₹1,03,600 (Level 8). Post-specific eligibility and pay must be checked against the applicable entry in the official rulebook.

MPESB Sub Engineer Eligibility Criteria 2026

Eligibility is not identical across all Group 3 posts. The required qualification depends on the post, discipline, department and sometimes the post code. Candidates should treat the following as a general guide based on the supplied material and verify the exact wording in the official rulebook.

Educational qualification

• Sub Engineer – Civil: A three-year Diploma in Civil Engineering or another higher qualification accepted for the relevant post; some roles may specify an additional GIS-related qualification.
• Sub Engineer – Electrical: A Diploma in Electrical Engineering or an equivalent qualification accepted for the particular post.
• Sub Engineer – Mechanical: A Diploma or Degree in Mechanical Engineering, as prescribed for the role.
• Electrical and Electronics-related posts: The specified qualification may be in Electrical Engineering, Electrical and Electronics Engineering or a related discipline.
• Draftsman, Laboratory Technician and Surveyor: Relevant technical, civil drafting, laboratory or surveying qualifications apply according to the post.
• Other technical and specialist posts: Posts in areas such as Computer Science, Electronics and Telecommunication, Agriculture, Automobile, Textile Design, Architecture, GIS, Hotel Management and Modern Office Management may require their own subject-specific qualifications; some posts also prescribe experience.

Because the recruitment includes many different post codes, a qualification that is accepted for one position should not automatically be assumed to qualify a candidate for another.

Age limit

Age relaxation and the date used to calculate age can depend on the applicable recruitment rules and candidate category. Confirm both from the official notification before applying.

How to Apply for MPESB Sub Engineer Recruitment 2026

Applicants should complete the form through the official MPESB application route during the applicable window. The broad process described in the supplied material is:

1. Open the official MPESB website and locate the Group-03 Combined Recruitment Examination 2026 (II) application link.
2. Register or sign in using the requested candidate details.
3. Enter personal information, educational qualifications, communication details and other required particulars.
4. Select the relevant post or post code only after checking its eligibility conditions.
5. Upload the documents requested in the prescribed format.
6. Pay the applicable examination fee and review the complete form carefully.
7. Submit the application and save or print the confirmation for your records.

Application fee listed in the supplied reference

Check the official portal for any applicable service charges, payment instructions or fee-related updates.

MPESB Sub Engineer Exam Pattern 2026–27

The examination pattern in the supplied material describes a three-hour computer-based test with 200 multiple-choice questions/marks divided between general subjects and technical or trade-specific content.

Use the official syllabus and post-specific rules to decide which technical topics deserve the most attention. A balanced preparation plan should reserve time for both the general section and the technical paper rather than focusing on only one part of the examination.

Exam Timings and Shift Details

The supplied reference lists two examination shifts, each with a three-hour test duration.

Shift allocation and reporting instructions should be confirmed from the candidate’s admit card and the latest official communication.

MPESB Sub Engineer Selection Process

According to the supplied recruitment summary, selection is based on performance in the online computer-based examination, followed by document verification for candidates shortlisted under the applicable process. Candidates should ensure that their certificates and qualification records match the details submitted in the application.

Preparation Strategy for MPESB Sub Engineer

1. Start with the official syllabus

Map the syllabus to your engineering discipline and the general section. This gives your preparation a clear boundary and helps prevent time being spent on unrelated topics.

2. Divide time between Part A and Part B

Since the supplied pattern assigns 100 marks to each part, create a weekly schedule that includes general awareness and aptitude alongside technical concepts and numerical practice.

3. Practise in timed conditions

Attempt mock tests or sectional tests with a timer. After each attempt, review incorrect answers, guessed responses and questions that took too long.

4. Keep a revision notebook

Record formulas, key concepts, recurring errors and facts that need frequent review. Revisit this notebook at regular intervals instead of leaving revision until the final days.

5. Verify updates from official notices

Vacancies, schedules, application instructions and post-wise eligibility can be updated. Check MPESB notices periodically and rely on the current rulebook for decisions about your application.

Frequently Asked Questions (FAQs)